SNR-403 Stynylrez Black Primer 4oz / 120ml
Warning: Last items in stock!
Stynylrez Black Primer 4oz / 120ml
WATER BASED ACRYLIC POLYURETHANE
EASY APP SURFACE PRIMER
“The perfect prime, everytime”
~Simple and easy application
~Self leveling detail enhancing coverage
~Excellent adhesion and durability
~Dries to a hard flat finish
~For use on plastics, metals, woods,
resin, various other substrates
~Simple and easy clean up
No thinning necessary. Shake well before using.
Best applied with a .5mm or larger nozzle airbrush at 20-30
psi (1.5-2 bar).
Pour the desired amount of STYNYLREZ primer into the
airbrush color reservoir. If using a bottom feed airbrush,
attach jar containing STYNYLREZ to the airbrush. Holding
the airbrush 4-6” (10-15cm) from the item you are priming,
apply STYNYLREZ in even coats over the entire surface of
the item. Apply in light coats, building the primer up until
the entire surface of the item is covered and the items
actual color is hidden. Check all areas and re-spray any
light areas or any areas where the items actual color is still
detectible. Let dry 5 to 8 minutes (3 minutes if dried with an
artificial heat source). Your item is now primed and ready
Clean your airbrush by immediately spraying MODELflex
airbrush cleaner through it.